Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Quick Changers  >  Quick Changers  > 7311 Gimatic Quick Change with Air Shut-off Large Plus Size (160mm)

7311 Gimatic Quick Change with Air Shut-off Large Plus Size (160mm)

Item #:QCX160 A 
Available: In Stock

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

782.00
Each
Quantity:
  • 2200g
  • Air valves automatically close the air flow before the system is disengaged
  • It is not possible to open the air flow if the flange is not engaged
  • The rotating tap valve solves all the problems of ball valve systems: the high pushing force necessary for engaging and the uncontrolled movements when disengaging.

SST

Style
Gimatic
Type
Robot Side QC
Size
160mm (Large Plus)
1817 Quick Changer Plate Large EOAT Mounting Adaptor

Typically used when the injection molding machine is over 750 tons, this plate is designed to mount large/jumbo >ASS<, Gimatic, and 80/20 four- and six-groove profiles (80mmx40mm) as well as all standard four- and six-groove >ASS<, Gimatic, and 80/20 profiles. It is pre-drilled to mount to the large EOAT quick changer. The counter-bored holes provide flush mounting surfaces on both sides. And it can also be used as a manual mounting plate to the robot.

Item #:
GSC QCAP L
99.00
Each
760 Quick Changer Basic Blank EOAT Mounting Adaptor Plate

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles. It's scored with a center line making it easy to locate holes for mounting to your robot tooling plate.

Item #:
GSC QCAP LB
98.40
Each
5837 Gimatic Quick Changer Large Adaptor Plate

Thin-plate interface to mount EOAT side quick changer to Gimatic, >ASS<, and 80/20 profiles. Fasteners and mounting screws are included.

Item #:
MFI A103
39.68
Each
Item #:
QC150 H
38.27
Each
3.90
Each
4.74
Each
Item #:
QC150 V
38.27
Each
7566 Gimatic Quick Changer with Integrated Flange Large Plus Size (160mm), EOAT Side

This EOAT Side Quick Changer with added Flange is a unique component that reduces backlash and provides better alignment.

Item #:
QCP160 B
339.00
Each
7381 Aluminum EOAT Centering Pin for Large Gimatic QC's QC150A

This centering pin helps the manual centering of heavy EOAT's

Item #:
QC150100
60.00
Each
5039 Quick Changer Robot Side Electrical Connector

This quick changer accessory connects electrical signals from the EOAT to the robot. It has 15 pin gold plated SUB D connectors and comes complete with mounting hardware.

I/O Connection Type: 15-pin D-Sub, VGA type Cable.

Item #:
CAQC
82.00
Each
21.84
Each
67.60
Each
35.36
Each
502 Low-Profile Electric QC Connector - Robot Side

I/O Connection Type: 15-pin Screw terminal module. Suitable for use with >ASS<, Senvex, and Gimatic Quick Changers. Certain Quick Changers require spacers for the electrical connector, see below.

Item #:
WGS QLEKRD
81.00
Each
7.88
Each
5060 Quick Changer Robot Side Electrical Connector with Spring Contacts

The lower profile pin design helps avoid damage to contacts. The spring assists in maintaining connection through constant compression and pin geometry. This provides simpler and easier coupling through self-aligning geometry.

I/O Connection Type: 15-pin D-Sub, VGA type Cable.

Item #:
MAQC
79.00
Each
7456 Quick Changer Robot Side 90° Electrical Connector with Spring Contacts

The lower profile pin design helps avoid damage to contacts. The spring assists in maintaining connection through constant compression and pin geometry. This provides simpler and easier coupling through self-aligning geometry.

I/O Connection Type: 15-pin Spring-Clip terminal module

Item #:
PMAQC
79.00
Each
7458 RFID Quick Changer Robot Side Electrical Connector

RFID identification module for automatic recognition of gripping tool composed of the Reader (RAQC) and the Tag (RBQC).

Item #:
RAQC
326.00
Each
7314 Gimatic Quick Changer Large Plus Size (160mm) EOAT Side

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

Item #:
QC160 B
339.00
Each
5013 Lock Unit for Quick Changers with Sensor Feedback

This Lock unit prevents accidental falling of the EOAT when used with Gimatic Quick Changers sized: 90, 150, 160, and 200. Lock unit ONLY works with newer model Gimatic Quick Changers that have a threaded hole.
3 kinds of safety: mechanical thanks to the spring actuated lock, electrical thanks to the magnetic sensor and electronic thanks to the inductive sensor.

Item #:
LOQC
51.31
Each