EMI MEX
216-535-4848
Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012
S2K Commerce - Products Dropdown
Actions
- ${title}
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084
S2K Commerce - Shopping Cart
Actions
- ${title}
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5
S2K Commerce - Order Entry
Actions
- ${title}
Loading...
Type
Electrical Connectors and Accessories for Quick Changers
While you can use any of these electrical connectors with any of the round Quick Changers sold by EMI, you must order the same style EOAT & Robot side connectors for a proper operation. Spacers are often needed depending on size and EC's you choose, refer to the notes on the product pages and Related Items listed on those pages.
1 - 35 of 35
Description
Price
Quantity
- 30g
- A standard 15 Pin Sub D cable WGS CA can be used to connect the interface to the robot / EOAT
- Fits Senvex, Gimatic, and >ASS< quick changers
- Adapter (Q#6743) needed for small size qc's
- Uses standard 15–pin D–sub cables
Item#:
CAQC
Available:
In Stock
82.00
Each
- Extra–strength Aluminum Housing
Item#:
CAQC DOUBLE
Available:
In Stock
67.60
Each
- Extra–strength Aluminum Housing
Item#:
CAQC STRONG
Available:
In Stock
35.36
Each
- A standard 15 Pin Sub D cable WGS CA can be used to connect the interface to the robot / EOAT
- Fits Senvex and Gimatic quick changers
- Adapter (Q#6743) needed for small size qc's
- Uses standard 15–pin D–sub cables
Item#:
CBQC
Available:
In Stock
46.00
Each
- Extra–strength Aluminum Housing
Item#:
CBQC DOUBLE
Available:
In Stock
67.60
Each
- Extra–strength Aluminum Housing
Item#:
CBQC STRONG
Available:
In Stock
35.36
Each
- 15 Pin Male End
- 1.5M Length
Item#:
CEQC A
Available:
In Stock
21.84
Each
- Must Solder Ends
- 15–pin D–sub, VGA type
Item#:
CEQC AC
Available:
In Stock
7.88
Each
- 15 Pin Female End
- 1.5M Length
Item#:
CEQC B
Available:
In Stock
21.84
Each
- Must Solder Ends
- 15–pin D–sub, VGA type
Item#:
CEQC BC
Available:
In Stock
7.88
Each
With the same mounting pattern as the tool flange of your cobot (ISO-9409-1-50-4-M6), you can mount any âPlug & Playâ end effector to the QC75-B for a quick and repeatable installation for every job. End effectors can be hard-wired to the QC75-B, or plugged to the wrist connector of your Cobot for even faster setup times.
- 18g
- 4 Integrated G1/8 pneumatic pass-through ports.
- Locked position sensing available.
- Optional electrical connector provides 16 screw terminals.
- Cobot insdustry standard ISO-9409-1-50-4-M6 mounting pattern.
- Handles both pneumatic and electrical end effectors.
- Air ports are integrated into the quick changer connection pins (patented) for streamlined pneumatic routing.
- Electrical connectors are integrated into the quick changer housing for streamlined wiring.
Item#:
CMAQC
Available:
In Stock
36.87
Each
With the same mounting pattern as the tool flange of your cobot (ISO-9409-1-50-4-M6), you can mount any âPlug & Playâ end effector to the QC75-B for a quick and repeatable installation for every job. End effectors can be hard-wired to the QC75-B, or plugged to the wrist connector of your Cobot for even faster setup times.
- 18.5g
- 4 Integrated G1/8 pneumatic pass-through ports.
- Locked position sensing available.
- Optional electrical connector provides 16 screw terminals.
- Cobot insdustry standard ISO-9409-1-50-4-M6 mounting pattern.
- Handles both pneumatic and electrical end effectors.
- Air ports are integrated into the quick changer connection pins (patented) for streamlined pneumatic routing.
- Electrical connectors are integrated into the quick changer housing for streamlined wiring.
Item#:
CMBQC
Available:
In Stock
86.89
Each
With the same mounting pattern as the tool flange of your cobot (ISO-9409-1-50-4-M6), you can mount any âPlug & Playâ end effector to the QC75-B for a quick and repeatable installation for every job. End effectors can be hard-wired to the QC75-B, or plugged to the wrist connector of your Cobot for even faster setup times.
- 15g
- 4 Integrated G1/8 pneumatic pass-through ports.
- Locked position sensing available.
- Optional electrical connector provides 16 screw terminals.
- Cobot insdustry standard ISO-9409-1-50-4-M6 mounting pattern.
- Handles both pneumatic and electrical end effectors.
- Air ports are integrated into the quick changer connection pins (patented) for streamlined pneumatic routing.
- Electrical connectors are integrated into the quick changer housing for streamlined wiring.
Item#:
CSAQC
Available:
In Stock
30.77
Each
- 20g
- Sensor ready – purchase separately
- Note, Lock unit ONLY works with newer model Gimatic Quick Changers that have a threaded hole.
Item#:
LOQC
Available:
In Stock
51.31
Each
- 30g
- A standard 15 Pin Sub D cable WGS CA can be used to connect the interface to the robot / EOAT
- Fits Senvex, Gimatic, and >ASS< quick changers
- Adapter (Q#6743) needed for small size Gimatic QC's
- Adapter (Q#3836) needed for small size >ASS< QC's
- Uses standard 15–pin D–sub cables
Item#:
MAQC
Available:
In Stock
79.00
Each
- 30g
- A standard 15 Pin Sub D cable WGS CA can be used to connect the interface to the robot / EOAT
- Fits Senvex, Gimatic, and >ASS< quick changers
- Adapter (Q#6743) needed for small size Gimatic QC's
- Adapter (Q#3836) needed for small size >ASS< QC's
- Uses standard 15–pin D–sub cables
Item#:
MBQC
Available:
In Stock
40.00
Each
- 15–pin D–sub, VGA type
- A standard 15 Pin Sub D cable WGS CA can be used to connect the interface to the robot / EOAT
- Fits Senvex, Gimatic, and >ASS< quick changers
- Adapter (Q#6743) needed for small size Gimatic QC's
- Adapter (Q#3836) needed for small size >ASS< QC's
Item#:
PAQC
Available:
In Stock
73.17
Each
- 15–pin D–sub, VGA type
- A standard 15 Pin Sub D cable WGS CA can be used to connect the interface to the robot / EOAT
- Fits Senvex, Gimatic, and >ASS< quick changers
- Adapter (Q#6743) needed for small size Gimatic QC's
- Adapter (Q#3836) needed for small size >ASS< QC's
Item#:
PBQC
Available:
In Stock
73.17
Each
- Must wire directly to the PCB terminal module
- Fits Senvex, Gimatic, and >ASS< quick changers
- Adapter (Q#6743) needed for small size Gimatic QC's
- Adapter (Q#3836) needed for small size >ASS< QC's
Item#:
PMAQC
Available:
In Stock
79.00
Each
- Must wire directly to the PCB terminal module
- Fits Senvex, Gimatic, and >ASS< quick changers
- Adapter (Q#6743) needed for small size Gimatic QC's
- Adapter (Q#3836) needed for small size >ASS< QC's
Item#:
PMBQC
Available:
In Stock
79.00
Each
- This adaptor is needed for small size Gimatic quick changers when using electrical connectors.
Item#:
QC50 K
Available:
In Stock
16.64
Each
- 53g
- The two parts (robot side and EOAT side) are provided separately
- They can be used on the left or right side
- Suitible for vacuum and compressed air
56.00
Each
- 53g
- The two parts (robot side and EOAT side) are provided separately
- They can be used on the left or right side
- Suitible for vacuum and compressed air
56.00
Each
- Up to 255 identifiable tools
- Binary coding of tools by means of 8 digital outputs 24Vdc.
- Generates a maintenance warning signal once the tool reaches a preset number of cycles
326.00
Each
- Up to 255 identifiable tools
- Binary coding of tools by means of 8 digital outputs 24Vdc.
- Generates a maintenance warning signal once the tool reaches a preset number of cycles
38.72
Each
- 7g
- For large size SWH-150 / Quick# 3831 & 3832
- Reference: 1-025-15-00
22.58
Each
- 6g
- For small size SWH-50 / Quick# 3815 & 3816
- Reference: 1-025-05-00
22.58
Each
- When using with the SWH 50 Quick Changers the Spacers SWH-DS-50 (Q#3836) have to be added to the robot & tool side of the quick changers.
- When using with the SWH 150 Quick Changers the Spacers SWH-DS-150 (Q#3837) have to be added to the robot & tool side of the quick changers.
- When using with the Large Size Senvex GSQ Quick Changers the Spacers WGS-QLEKD (Q#504) have to be added to the robot & tool side of the quick changers.
- When using with the Gimatic Size 50 Quick Changers the Spacers QC50-K (Q#6743) have to be added to the robot & tool side of the quick changers.
- Elbow air fittings for 6mm O.D hose are included.
- 50g
- Reference: 1-023-20-00
Item#:
SWH PG 4
Available:
In Stock
54.60
Each
- When using with the SWH 50 Quick Changers the Spacers SWH-DS-50 (Q#3836) have to be added to the robot & tool side of the quick changers.
- When using with the SWH 150 Quick Changers the Spacers SWH-DS-150 (Q#3837) have to be added to the robot & tool side of the quick changers.
- When using with the Large Size Senvex GSQ Quick Changers the Spacers WGS-QLEKD (Q#504) have to be added to the robot & tool side of the quick changers.
- When using with the Gimatic Size 50 Quick Changers the Spacers QC50-K (Q#6743) have to be added to the robot & tool side of the quick changers.
- Elbow air fittings for 6mm O.D hose are included.
- 50g
- Reference: 1-023-25-00
Item#:
SWH PR 4
Available:
In Stock
103.95
Each
- 6g
- For small size SWH-50 / Quick# 3816
- Use with inductive sensors
- Sensor bracket mounts on the EOAT or Robot side of QC
- Sensor signals when QC lock is engaged.
- Reference: 1-024-05-00
25.20
Each
- 7g
- For regular and large size SWH Quick Changers
- Use with inductive sensors
- Sensor bracket mounts on the EOAT or Robot side of QC
- Sensor signals when QC lock is engaged.
- Reference: 1-024-09-00
Item#:
SWH SH G 90150
Available:
In Stock
25.20
Each
- Use this spacer with low–profile electrical connectors and large size Senvex quick changers.
9.50
Each
- Supplied with 500mm long cable
- Must order spacer #504 if using with a large size Senvex quick changer
- Must order spacer #3836 if using with a small size ASS quick changer
- Must order spacer #3837 if using with a large size ASS quick changer
- Must order spacer #6743 if using with a small size Gimatic quick changer
81.00
Each
- Supplied with 500mm long cable
- Must order spacer #504 if using with a large size Senvex quick changer
- Must order spacer #3836 if using with a small size ASS quick changer
- Must order spacer #3837 if using with a large size ASS quick changer
- Must order spacer #6743 if using with a small size Gimatic quick changer
81.00
Each
1 - 35 of 35