Extruded Aluminum Frame Conveyors, Flat Belt

Available lengths: 3'–33' at 1" (25mm) increments
Available belt widths: 4"-60" at 2" (50mm) increments

Literature:

• Online Interactive Catalog
• Extruded Aluminum Brochure

Specifications:

• Anodized extruded aluminum frame with side channels that accept standard 3/8" hex head bolts/nuts See Detailed Illustration
• Anodized aluminum side rails 4" high, 90° overlapping the belt 1¼" per side
• Easy adjusting extruded aluminum leg sets with 4" locking swivel castors
• 1/3 hp AC Variable Speed Drive
• Gear reducer is sealed and permanently lubricated requiring no service
• 6-20 FPM variable speed drive
• Timing belt power transmission is enclosed within the conveyor frame
• 100 lb. maximum load
• V-guide belt guidance
• Automatic spring loaded belt tensioning
• Laced, flat polyurethane belting (blue), FDA approved material
• 175°F belt temperature resistance
• Units up to 20' long are shipped fully assembled

Common Options:

• Extruded Aluminum Conveyor Options
• 12-40 FPM or 21-70 FPM are available at no charge
• Endless belting is available at no charge
• Soft drop zone, to cushion part drop
• Straight side rails or no side rails
• Side rail extensions for part containment
• Lexan™ rail covers
• Chilled air or ambient air blowers for part cooling
• Stainless steel discharge chute
• Alternate belting is available on all EA models. View all the options here.
• Sealed belt edges to minimize dust
• Deionizing blowers to eliminate static electricity and prevent particles from sticking to parts
• AC frequency motor for low cost indexing
• Robotic indexing control interface
• Box filling by cycle count or weight
• Reversing for process control
• Alternate motor locations

BW = Belt width

Usable belt width measurement and rail options