EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7527 Y M8 Cable for Gimatic PRO & SBM Sensors 1x 8 Pin Female 3x 3 Pin Male
Use this extension cable to connect Gimatic PRO teachable sensors to a SBM sensor box.
- M8 8 pin female connector inlet (only 5 pin connected), outlet with 3 M8 3 pin male connectors
- 2.7mm cable diameter
- 0.3m cable length
The SBM modular Sensor Box is a configurable sensor management system that consists of one or more primary modules (SBMM-E, SBMM) for outputs to the robot or PLC; one or more secondary modules (SBMS-E, SBMS) to receive inputs from the sensors and transfer the signal to the primary module; and one mounting and termination unit (SBMK).
The SBM modular Sensor Box is a configurable sensor management system that consists of one or more primary modules (SBMM-E, SBMM) for outputs to the robot or PLC; one or more secondary modules (SBMS-E, SBMS) to receive inputs from the sensors and transfer the signal to the primary module; and one mounting and termination unit (SBMK).
Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.
Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.