Merit Line, Z-Style Steel & Aluminum Conveyors

• 6-20 FPM 1/3 hp AC variable speed drive
• 50 lbs. maximum load
• Double V-guided, FDA approved, white PVC belt with 1 1/2" high cleats on 18" centers
• 4" high side rails, lapped over conveyor belt
• Leg sets and swivel castors included. Legs adjustable up to 34" infeed belt height. Specify infeed and discharge belt heights
• 15' power cord included. Pre-wired ready to run (except polyphase systems which require some customer wiring)
• Control wiring contained in liquid-tight conduit and connectors
• Units ship fully assembled

Two Ways to Order:

1. Download Conveyor Specifications Form pdf.

• Fill in the information in sections C and D—as well as any other information pertinent to your application.
• Submit by Email or Fax to 216-535-4823.

2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) - please have the following information available:

• The conveyor model you are ordering
• The belt width you need (standard widths are 6", 9", 12", 18", 24", 30")
• The infeed length (in feet) you need (A dimension) Minimum length 2.5'. A + B + C can not exceed 15'
• The incline length (in feet) you need (B dimension) Minimum length 2.5'. A + B + C can not exceed 15'
• The top shelf length (in feet) you need (C dimension) Minimum length 3'. A + B + C can not exceed 15'
• Standard 20 fpm belt speed (40 fpm, 80 fpm and variable speed also available)
• Note: Additional widths, lengths, belt speeds, etc. are available.

BW = Belt width
⚫ = Standard starter position (specify if other location)
◪ = Drive location for 24" & 30" models is mounted on the infeed end
Drive location for 9", 12", and 18" models is mounted on discharge end
11" min. infeed belt height w/standard legs and castors
A, B & C dimensions are in 1' increments + 6"