Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  EOAT for Cobots  >  Accessories for Cobots  >  EMI Cobot Accessories  > 8025 Cobot Wrist Wrangler Kit for UR5

8025 Cobot Wrist Wrangler Kit for UR5 —75mm Wrist Mount

Item #:CRA WW1 A5 
Available: In Stock

The Wrist Wrangler from EMI is a cable and tubing management solution designed for collaborative robots. It clamps at the wrist of your robot and it helps organize cables and pneumatic lines for more complex EOAT or for multiple gripper tools.

189.00
Each
Quantity:

Available with ∅63mm, ∅75mm and ∅90mm robot wrist clamps, it can secure 8x conduits up to ∅10m each with an additional grommet at the center for additional tubing and cables.

No cable ties required!

  • 86g
  • Compatible robot wrist size: ∅75mm (also available in ∅63mm, ∅90mm or custom)
  • (8x) ∅2.5-10mm pass-throughs with thumbscrews and adjustable clamps
  • Central pass through for additional cables or larger tubing.
  • Friction pads on clamp to prevent spinning on robot wrist.
  • Fits most common M8 connectors through.
  • 4mm hex key needed for installation on robot
  • No tools or cable ties to secure your tubing and cables
23.33
Each
23.33
Each
23.33
Each
21.35
Each
21.35
Each
8015 Cable Management Kit for Collaborative Robots

Organize and secure pneumatic and electric lines running down your robot arm. Clamps have (4x) channels for tubing and cables up to 8mm diameter. Kit includes 2 clamps, one 12in. strap, and one 18in. strap that fit most Collaborative Robots.

Item #:
CRA CMK 1
35.00
Each
8016 5/2 Solenoid Valve Kit for Industrial Robots and Cobots

EMI's Solenoid Valve Kit for Collaborative Robots is an essential add-on for all pneumatic applications. This powerful 5-port/2-position valve enables you to actuate Single Acting (NO/NC) and Double Acting end effectors while using a single Digital Output and compressed air line.

Item #:
CRA SVK 1
149.00
Each
8022 Cobot Tubing Manifold Kit 4 Port Ø4mm Tubing

Available with Ø4mm push-to-connect fittings, this Tubing Manifold Kit allows you to transition polyurethane tubing between robot joints and to maintain organized pneumatic circuits whether you use straight, spiral tubing or both!

Item #:
CRA TMK 4P04
48.50
Each
8021 High-Vacuum Vacuum Generator Kit for Collaborative Robots

The Vacuum Generator Kit for Cobots by EMI operates off of a 24Vdc, mono-stable signal and is the ideal solution for vacuum EOAT. With an incorporated teachable vacuum switch, 3D printed housing and anti-slip straps, the VGK is a true plug and play solution for your cobot. Contact our Engineering department if you would like to discuss a custom Vacuum EOAT solution.

Item #:
CRA VGK 1
265.00
Each
11.50
Each
11.50
Each
11.50
Each
6.80
Each
6.80
Each
6.80
Each
20.00
Each
20.00
Each
20.00
Each