EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7552 Gimatic Compact Sprue Body with HNBR Pads & Sensor Slot
 New Sensor Slot position provides sensing without interfering with the part being gripped, sensors sold separately. Soft touch, non-marking HNBR pads have a maximum temperature of 302°F. The gripper must be connected to compressed air to get a sprue gripped confirmation.
- 132g
- Gripper has a G1/8 air port opposed to the old-style Gimatic DD grippers that use M5 fittings
- Gripper must be connected to compressed air to get a sprue gripped confirmation.
- 1.2–12mm Applicable Sprue – Unreliable sensing may occur if the part being gripped has a thickness less than 1.2mm.
- Single acting with spring open
- Very high closing force
- Clampable along full length of body
- Many mounting options available
Gripper
This sensor is the replacement for Part# SS3M203Y. The only difference is it does not come with the adaptor for grippers with a T-slot.
This sensor is the replacement for Part# SS3N203Y. The only difference is it does not come with the adapter for grippers with a T-slot.
This sensor is the replacement for Part# SS4M225Y. The only difference is it does not come with the adapter for grippers with a T-slot.
This sensor is the replacement for Part# SS4N225Y. The only difference is it does not come with the adapter for grippers with a T-slot.
Kit includes: Two old style (with pull tabs) and Two new style HNBR pads (with snap in tabs) for DD20-16 grippers. Dimensions: 25.4 x 12.7mm, 2mm thickness
Use this replaceable TPU pad on any DD20-16L2 (Q#7552), DD20-16P (Q#7123), or DD20-16PS (Q#7124). Dimensions: 25.4 x 12.7mm, 2mm thickness.
Use this replaceable HNBR pad on any DD20-16L2 (Q#7552), DD20-16P (Q#7123), or DD20-16PS (Q#7124). Dimensions: 25.4mm x 12.7mm, 2mm thickness.
Use this replaceable Polyurethane pad on any DD20-16L2 (Q#7552), DD20-16P (Q#7123), or DD20-16PS (Q#7124). Dimensions: 25.4 x 12.7mm, 2mm thickness.
Use this replaceable PTFE pad on any DD20-16L2 (Q#7552), DD20-16P (Q#7123), or DD20-16PS (Q#7124). Dimensions: 25.4 x 12.7mm, 2mm thickness.
| No. | Part No. | Item Description | Qty Req. | Price | Qty |
| 8 | DD20 16R 20 |
Jaw Spring for DD20-16 Gimatic Grippers
|
1 |
3.17
Each
|
|
| 9 | DD20 16R 21 |
Piston Spring for DD20-16 Gimatic Grippers
|
1 |
3.64
Each
|
|
| 10 | DD20 16R 24 |
Protection Filter for DD20 Gimatic Gripper
|
1 |
2.53
Each
|
|