EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
8155 Gimatic Electric Quick Changer Size 20, Robot Side for TM with 8-Pin M8 Male Connector
The EQC electric quick changer is available for applications that need automatic change of the gripping element. The robot side (-A) is usually connected to a TM robot wrist while one or more flanges (-B) are connected to the interchangeable gripping elements.
- 810g
- Plug & Play system for TM Robots
- Six 6mm integrated pneumatic connections
- Designed for collaborative robot applications.
- Male 8-Pin M8 Connector
- 24 Vdc low voltage supply.
- Optional electric connectors to be positioned in the central through hole.
Connect to the TM two ways: Either a single connection at the wrist. This solution is based on one cable only connected to the wrist that feeds both the tool changer and the tool. Another solution, the RMAQC-TM is connected to the cabinet and the EQC20TM-A is at the wrist. This solution allows you to feed the tool changer from the wrist of the robot and to connect the tool to the I/O of the cabinet. More information is included with the electrical connector.
Size
The EQC electric quick changer is available for applications that need automatic change of the gripping element. The robot side (-A) is usually connected to a robots wrist while one or more flanges (-B) are connected to the interchangeable gripping elements.
These pins are recommended for storage of your EOAT. Contact us for a cradle to hold your EOAT.
This robot-side quick changer accessory connects electrical signals from the EOAT to your TM robot. EOAT side sold separately.
This eoat-side quick changer accessory connects electrical signals from the EOAT to your TM robot. Robot side sold separately.
The OnRobot Angle Bracket enables you to attach tools at a 90 degree angle to the robot flange. This improves the tools ability to fit into tight spaces and it can lower the risk of the robot arm going into singularity.
This version has a different pin configuration to allow for a higher amperage draw through some pins. The standard RMAQC has 32 Pins each with a current rating of 1amp each. The RMAQC-S & RMBQC-S have 2 pins that have a rating of up to 6 amps each and 14 pins at .5 amp each. The higher amp pins allow for the powering of higher amp load devices through the quick changer.