6967 Gimatic Stationary Nipper Size 20

Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.

• Very high initial sharpness.
• Excellent for harder to cut plastics.
• May take more maintenance to keep blades sharp.
• Forged blades from high speed steel and hardened.

Swanstrom nippers are very good quality at a competitive cost with carbide and custom blades available at reasonable lead times. Set-screw mechanical stops are pre-set at the factory ensuring proper blade pressure for a clean, flush cut and long blade life.

• Forged blades from high chromium, high carbon alloy steel and hardened to 6064 HRC.
• Best quality joint of any blade brand, helps reduce the need for sharpening.

Gimatic nippers have a very good quality, lower cost make it a top performing, brand alternative. They now include a protective blade cover which can be mounted to profile when not in use.

• Very high initial sharpness.
• Excellent for harder to cut plastics.
• May take more maintenance to keep blades sharp.
• Permanent mechanical stops are pre-set at the factory.
• Forged blades from high-speed steel and hardened.

Nile nippers are good quality basic blade at a competitive cost. Blade sharpness has an initial tendency to be more blunt compared to other blades; however, this design will stay sharper longer when other initially sharper blades lose their sharpness. Mechanical stops are at the crotch of the blade which ensures a very precise stop, preventing blade bypass and overlap. Should the blade need resharpening, the mechanical stop can usually be hand honed to meet original performance specifications

• Good for general purpose plastics.
• Forged blades from high speed steel and hardened.

Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.

• Very high initial sharpness.
• Excellent for harder to cut plastics.
• May take more maintenance to keep blades sharp.
• Forged blades from high speed steel and hardened.

Swanstrom nippers are very good quality at a competitive cost with carbide and custom blades available at reasonable lead times. Set-screw mechanical stops are pre-set at the factory ensuring proper blade pressure for a clean, flush cut and long blade life.

• Forged blades from high chromium, high carbon alloy steel and hardened to 6064 HRC.
• Best quality joint of any blade brand, helps reduce the need for sharpening.

Gimatic nippers have a very good quality, lower cost make it a top performing, brand alternative. They now include a protective blade cover which can be mounted to profile when not in use.

• Very high initial sharpness.
• Excellent for harder to cut plastics.
• May take more maintenance to keep blades sharp.
• Permanent mechanical stops are pre-set at the factory.
• Forged blades from high-speed steel and hardened.

Nile nippers are good quality basic blade at a competitive cost. Blade sharpness has an initial tendency to be more blunt compared to other blades; however, this design will stay sharper longer when other initially sharper blades lose their sharpness. Mechanical stops are at the crotch of the blade which ensures a very precise stop, preventing blade bypass and overlap. Should the blade need resharpening, the mechanical stop can usually be hand honed to meet original performance specifications

• Good for general purpose plastics.
• Forged blades from high speed steel and hardened.

Swanstrom nippers are very good quality at a competitive cost with carbide and custom blades available at reasonable lead times. Set-screw mechanical stops are pre-set at the factory ensuring proper blade pressure for a clean, flush cut and long blade life.

• Forged blades from high chromium, high carbon alloy steel and hardened to 6064 HRC.
• Best quality joint of any blade brand, helps reduce the need for sharpening.

Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.

• Very high initial sharpness.
• Excellent for harder to cut plastics.
• May take more maintenance to keep blades sharp.
• Forged blades from high speed steel and hardened.

Swanstrom nippers are very good quality at a competitive cost with carbide and custom blades available at reasonable lead times. Set-screw mechanical stops are pre-set at the factory ensuring proper blade pressure for a clean, flush cut and long blade life.

• Forged blades from high chromium, high carbon alloy steel and hardened to 6064 HRC.
• Best quality joint of any blade brand, helps reduce the need for sharpening.

Swanstrom nippers are very good quality at a competitive cost with carbide and custom blades available at reasonable lead times. Set-screw mechanical stops are pre-set at the factory ensuring proper blade pressure for a clean, flush cut and long blade life.

• Forged blades from high chromium, high carbon alloy steel and hardened to 6064 HRC.
• Best quality joint of any blade brand, helps reduce the need for sharpening.

Gimatic nippers have a very good quality, lower cost make it a top performing, brand alternative. They now include a protective blade cover which can be mounted to profile when not in use.

• Very high initial sharpness.
• Excellent for harder to cut plastics.
• May take more maintenance to keep blades sharp.
• Permanent mechanical stops are pre-set at the factory.
• Forged blades from high-speed steel and hardened.

Swanstrom nippers are very good quality at a competitive cost with carbide and custom blades available at reasonable lead times. Set-screw mechanical stops are pre-set at the factory ensuring proper blade pressure for a clean, flush cut and long blade life.

• Forged blades from high chromium, high carbon alloy steel and hardened to 6064 HRC.
• Best quality joint of any blade brand, helps reduce the need for sharpening.

Swanstrom nippers are very good quality at a competitive cost with carbide and custom blades available at reasonable lead times. Set-screw mechanical stops are pre-set at the factory ensuring proper blade pressure for a clean, flush cut and long blade life.

• Forged blades from high chromium, high carbon alloy steel and hardened to 6064 HRC.
• Best quality joint of any blade brand, helps reduce the need for sharpening.

This sensor is the replacement for Part# SS3M203Y. The only difference is it does not come with the adaptor for grippers with a T-slot.

This sensor is the replacement for Part# SS3N203Y. The only difference is it does not come with the adapter for grippers with a T-slot.

This sensor is the replacement for Part# SS4M225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

This sensor is the replacement for Part# SS4N225Y. The only difference is it does not come with the adapter for grippers with a T-slot.