Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
0 Items
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  EOAT for Cobots  >  Quick Changers  >  Automatic Quick Changer - SmartShift  > 8481 SmartShift Electrical Connector, Tool Side (EOAT Side)

8481 SmartShift Electrical Connector, Tool Side (EOAT Side) with M8 8-Pin Male Connector

Item #:SS 2110 
Available: In Stock

Electric Tool Change

When running an electric tool change sequence, it is important to remember switching on and off the electric flow.

Example: Robot + Smartshift Tool Change + electric tool.

When running this operation there will be a constant power flow from the robot to the electric tool. Smartshift electric tools are a pure pass-through unit and does not regulate the power flow when using the Tool Change system. This way you need to create an On/Off move when picking up or delivering the electric tool in the Tool Pocket (TP). Not creating this command on the robot may damage the Robot or electric tool due to short-circuit damage. Being a mechanical system with only pure pass-through function, Smartshift is not eligible for any damage to the use of external units.

When pick up of tool, turn off power supply to tool. Once tool is picked up, turn power supply on again. The same is done on delivery in the opposite direction.

289.00
Each
Quantity:
  • NOTE: Power connection must be OFF during clutching in and out. A charged pin will create a spark that will destroy the connector pins by welding/ burns.
  • 310g
  • Recommended for robots handling payload up to: 110lb (50kg)
  • Includes mounting hardware.
  • Reference SmartShift: 2110
SS 2111
8482 SmartShift Electrical Connector, Tool Side (EOAT Side) with M8 8-Pin Female Connector
Item #:
SS 2111
289.00
Each
SS 2120
8466 SmartShift Gen III Automatic Quick Changer Tool Side (EOAT Side)

Gen III SmartShift with a vacuum EOAT that requires electrical connection, pneumatics and a vacuum-actuated soft gripper. Tool pockets and framing can be built around your specific application.

SmartShift automatic tool changers feature a clutch-driven engagement that enables mechanical, pneumatic and optional electric connections. No need for compressed air or electricity for coupling, and available as a kit or a la carte, in two different payload capacities. Automatic Tool Changers require some level of added integration, and we encourage you to partner with our EOAT Engineers to ensure a seamless implementation.

Item #:
SS 2120
402.00
Each
SS 2600
8469 SmartShift HD63 Automatic Quick Changer, Tool Side (EOAT Side)

SmartShift HD63: Higher payload and added safety features!

The HD63 version uses the same principle as the standard (Gen III) SmartShift and even uses the same pneumatic and electrical accessories. Here are a few features that set it apart and make it suitable for higher payload applications. Automatic Tool Changers require some level of added integration, and we encourage you to partner with our EOAT Engineers to ensure a seamless implementation.

Item #:
SS 2600
475.00
Each