EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
8030 KIT-TM-V Vacuum Gripping for Techman Robots
Gimatic Vacuum Kit-TM-V for Techman Robots is a modular and durable vacuum end effector. A lightweight, extruded aluminum frame offers versatility so it can be used for different tasks with minimal setup time. Delivered fully assembled, and easy to adjust!
The KIT-TM-V is an EOAT for pick & place applications which exploits the vacuum technique and it is designed for Techman Robot cobots (TM5, TM12 and TM14 series). This kit is completely compatible with Gimatic EQC20-TM (Quick#8155) and it can be used in combination with any collaborative robot that provides a limited power supply capability at the wrist.
- Weight: 1.3 kg.
- No cables along the robot arm: direct connection to M8 plug connector of the robot.
- Easy to install and without any configuration (plug & play solution).
- Embedded vacuum generator, valve and solenoid.
- 306mm x 228mm x 135mm.
- Delivery with standard HNBR vacuum cups. Contact EMI for different vacuum cups.
The Vacuum Generator Kit for Cobots by EMI operates off of a 24Vdc, mono-stable signal and is the ideal solution for vacuum EOAT. With an incorporated teachable vacuum switch, 3D printed housing and anti-slip straps, the VGK is a true plug and play solution for your cobot. Contact our Engineering department if you would like to discuss a custom Vacuum EOAT solution.
Organize and secure pneumatic and electric lines running down your robot arm. Clamps have (4x) channels for tubing and cables up to 8mm diameter. Kit includes 2 clamps, one 12in. strap, and one 18in. strap that fit most Collaborative Robots.
With the same convenience as the conventional vacuum filters (the VFU series), this filter can be used in the positive pressure as well.
The EQC electric quick changer is available for applications that need automatic change of the gripping element. The robot side (-A) is usually connected to a TM robot wrist while one or more flanges (-B) are connected to the interchangeable gripping elements.
The EQC electric quick changer is available for applications that need automatic change of the gripping element. The robot side (-A) is usually connected to a robots wrist while one or more flanges (-B) are connected to the interchangeable gripping elements.
This robot-side quick changer accessory connects electrical signals from the EOAT to your TM robot. EOAT side sold separately.
This eoat-side quick changer accessory connects electrical signals from the EOAT to your TM robot. Robot side sold separately.