EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7461 Micro PB with HNBR Padded Jaws and Sensor Slot
New with sensor slot! This Micro PB utilizes the same simple, strong, and lightweight mechanism as the other PB grippers with years of proven reliable service.
- Gripper fingers join at the tip to prevent small part/sprue loss for diameters as small as 1mm.
- Non-marking HNBR pads have a maximum temperature of 302°F.
- Very compact and lightweight but with enough grip force to reliably grip small parts and sprues.
- 17g
- 1–6mm Applicable Sprue
- Very compact and lightweight
- Angular, non-self-centering.
- Purchase Gimatic PRO SSR sensor separately. Due to the location of the PB micro grippers magnet, please pay attention to sensor orientation. (see photo above).
- ∅10mm diameter mounting post with M5 airport allows this gripper to be used with standard mounting and air connection components.
- Ø5.5 thru hole for direct plate mounting.
Gripper
13.2mm length, 3.5mm width, 2mm thickness.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
| No. | Part No. | Item Description | Qty Req. | Price | Qty |
| n/a | PB 0008 4 |
Replacement Main Spring for Micro PB Grippers
|
0 |
4.36
Each
|
|
| n/a | PB 0007 1 |
7373 Replacement HNBR Pad
|
0 |
5.29
Each
|
|