EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7280 Gimatic Micro Sprue Gripper, Sensor Ready
Simple, easy sensing. Using a single sensor on the body, it positively confirms the sprue is gripped. Eliminating the hide and seek process of sensor set-up.
- Gripper fingers join at the tip to prevent small part/sprue loss for diameters as small as 1mm.
- Small diamond-textured gripping surface aids in both pulling and cradling small sprues.
- Very compact and lightweight but with enough grip force to reliably grip small parts and sprues.
- 18g
- 1–6mm Applicable Sprue
- Angular, non-self-centering.
- Very compact and lightweight
- Purchase Gimatic PRO-SSR sensors separately. Due to the location of the PB micro grippers magnet, please pay attention to sensor orientation. (see photo above).
- Ø5.5 thru hole added for direct plate mounting.
- 10mm diameter mounting post with M5 airport allows this gripper to be used with standard mounting and air connection components.
Gripper
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
| No. | Part No. | Item Description | Qty Req. | Price | Qty |
| n/a | PB 0008 4 |
Replacement Main Spring for Micro PB Grippers
|
0 |
4.36
Each
|
|