Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Quick Changers  >  Quick Changers  > 6423 Gimatic Quick Changer Small Size (50mm), EOAT Side

6423 Gimatic Quick Changer Small Size (50mm), EOAT Side

Item #:QC50 B 
Available: In Stock

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

103.00
Each
Quantity:
  • 103g
  • Maximum air pressure: 87psi (6 bar)
  • 4, M5 O.D. air ports
  • Electrical connector is optional

SST

Style
Gimatic
Type
EOAT Side QC
Size
50mm (Small)
7303 Gimatic Quick Changer Mini Adaptor Plate

Thin-plate interface to mount EOAT side quick changer to Gimatic, >ASS<, and 80/20 profiles. Fasteners and mounting screws are included.

Item #:
MFI A277
23.66
Each
6069 Storage Hanger for Small Size Gimatic Quick Changer QC50 (Horizontal)

For horizontal wall mounting and storage of EOAT's

Item #:
QC50 H
20.75
Each
16.64
Each
4.16
Each
4.19
Each
5.95
Each
4.47
Each
5996 Storage Hanger for Small Size Quick Changer QC50 (Vertical)

For vertical wall mounting and storage of EOAT's

Item #:
QC50 V
20.75
Each
5040 Quick Changer EOAT Side Electrical Connector

This quick changer accessory connects electrical signals from the EOAT to the robot. It has 15 pin gold plated SUB D connectors and comes complete with mounting hardware.

I/O Connection Type: 15-pin D-Sub, VGA type Cable.

Item #:
CBQC
46.00
Each
67.60
Each
35.36
Each
21.84
Each
7.88
Each
503 Low-Profile Electric QC Connector - EOAT Side

I/O Connection Type: 15-pin Screw terminal module. Suitable for use with >ASS<, Senvex, and Gimatic Quick Changers. Certain Quick Changers require spacers for the electrical connector, see below.

Item #:
WGS QLEKGD
74.00
Each
5059 Quick Changer EOAT Side Electrical Connector with Spring Contacts

The lower profile pin design helps avoid damage to contacts. The spring assists in maintaining connection through constant compression and pin geometry. This provides simpler and easier coupling through self-aligning geometry.

I/O Connection Type: 15-pin D-Sub, VGA type Cable.

Item #:
MBQC
40.00
Each
7457 Quick Changer EOAT Side 90° Electrical Connector with Spring Contacts

The lower profile pin design helps avoid damage to contacts. The spring assists in maintaining connection through constant compression and pin geometry. This provides simpler and easier coupling through self-aligning geometry.

I/O Connection Type: 15-pin Spring-Clip terminal module

Item #:
PMBQC
79.00
Each
7459 RFID Quick Changer EOAT Side Electrical Connector

RFID identification module for automatic recognition of gripping tool composed of the Reader (RAQC) and the Tag (RBQC).

Item #:
RBQC
38.72
Each
6422 Gimatic Quick Changer Small Size (50mm), Robot Side

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

Item #:
QC50 A
207.00
Each