EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7566 Gimatic Quick Changer with Integrated Flange Large Plus Size (160mm), EOAT Side
This EOAT Side Quick Changer with added Flange is a unique component that reduces backlash and provides better alignment.
- 1150g
- Twelve G1/8 ports for fittings
- This QC with interface that attaches to profile is integrated achieving a lighter weight, with reduced backlash.
- Better accuracy with no more re-alignment. (Shocks, vibrations, and storage can cause misplacement of the original interface, this solves all possible problems.
SST
Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).
Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).
This quick changer accessory connects electrical signals from the EOAT to the robot. It has 15 pin gold plated SUB D connectors and comes complete with mounting hardware.
I/O Connection Type: 15-pin D-Sub, VGA type Cable.
This centering pin helps the manual centering of heavy EOAT's
I/O Connection Type: 15-pin Screw terminal module. Suitable for use with >ASS<, Senvex, and Gimatic Quick Changers. Certain Quick Changers require spacers for the electrical connector, see below.
The lower profile pin design helps avoid damage to contacts. The spring assists in maintaining connection through constant compression and pin geometry. This provides simpler and easier coupling through self-aligning geometry.
I/O Connection Type: 15-pin D-Sub, VGA type Cable.
The lower profile pin design helps avoid damage to contacts. The spring assists in maintaining connection through constant compression and pin geometry. This provides simpler and easier coupling through self-aligning geometry.
I/O Connection Type: 15-pin Spring-Clip terminal module
RFID identification module for automatic recognition of gripping tool composed of the Reader (RAQC) and the Tag (RBQC).
Typically used when the injection molding machine is over 750 tons, this plate is designed to mount large/jumbo >ASS<, Gimatic, and 80/20 four- and six-groove profiles (80mmx40mm) as well as all standard four- and six-groove >ASS<, Gimatic, and 80/20 profiles. It is pre-drilled to mount to the large EOAT quick changer. The counter-bored holes provide flush mounting surfaces on both sides. And it can also be used as a manual mounting plate to the robot.
This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles. It's scored with a center line making it easy to locate holes for mounting to your robot tooling plate.
Thin-plate interface to mount EOAT side quick changer to Gimatic, >ASS<, and 80/20 profiles. Fasteners and mounting screws are included.
For horizontal wall mounting and storage of EOAT's
For vertical wall mounting and storage of EOAT's
Fastens to Large-size quick changer for easy mounting of >ASS<, Gimatic and 80/20 profile.
