EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7596 Upgrade Kit for SGP-20S Use with PRO-SN Sensors
Upgrade your old style SGP Grippers: Old grippers can be upgraded to use the new Gimatic teachable PRO-SN sensors
In 2020, Gimatic will be assembling and shipping SGP-S grippers with a provision for the new programmable PRO-SN Sensors. This gives the ability to program up to 3 sensing positions on the gripper with one sensing point and has the accuracy to sense mid-stroke conditions. You can use this kit to upgrade your current SGP-S gripper.
Advantages:
Type
Gimatic PRO-SN high sensitivity sensors are digital magnetoresistive sensors with up to 3 programmable output signals for SGP-S Grippers. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SN high sensitivity sensors are digital magnetoresistive sensors with up to 3 programmable output signals for SGP-S Grippers. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SN high sensitivity sensors are digital magnetoresistive sensors with up to 3 programmable output signals for SGP-S Grippers. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SN high sensitivity sensors are digital magnetoresistive sensors with up to 3 programmable output signals for SGP-S Grippers. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.