Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  General Purpose Grippers  >  Parallel - IP67 Rated (Gimatic SX)  > 7168 Gimatic Parallel Gripper SX5030

7168 Gimatic Parallel Gripper SX5030 30mm Stroke-50mm Bore

Item #:SX5030 
Available: In Stock

SX parallel grippers are specifically designed to provide the better performances in harsh environments, internally sealed to preserve from dust, oil and also one meter underwater with protection class IP67. These parallel grippers have no internal volumes, so there is no risk of aspiration caused by the pump effect of a variable volume.

Shown here, Gimatic Teachable PRO... sensors are linked below in Related Items

1042.00
Each
Quantity:
  • 1300g
  • 30mm Stroke
  • Double acting
  • 50 bore
  • Optional proximity magnetic sensors available, including midstroke detection with Gimatic PRO.. sensors
  • Completely sealed IP67 gripper, suitable for Clean Room Applications
  • Internally sealed and tested up to 1 meter under water
  • Available on request with food grease FDA–H1 and with high temperature seals

EMI has taken a cost-effective and industry-proven gripper to expand the capabilities of Universal Robots UR3, UR5 and UR10 Collaborative Industrial robots. View the SX Cobot Kit here.

28.70
Each
31.16
Each
31.16
Each
27.20
Each
27.20
Each
1884 Gimatic 3-Wire C-Slot NPN Sensor with M8 Connector

This sensor is the replacement for Part# SS3M203Y. The only difference is it does not come with the adaptor for grippers with a T-slot.

Item #:
SS3M203G
31.16
Each
6282 Gimatic 3-Wire C-Slot PNP Sensor with M8 Connector

This sensor is the replacement for Part# SS3N203Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS3N203G
31.16
Each
1883 Gimatic 3-Wire C-Slot NPN Sensor with 2.5m lead

This sensor is the replacement for Part# SS4M225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS4M225G
27.20
Each
1882 Gimatic 3-Wire C-Slot PNP Sensor with 2.5m lead

This sensor is the replacement for Part# SS4N225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS4N225G
27.20
Each
7526 Gimatic 5-Wire Teachable C-Slot PNP Sensor with M8 Connector

Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.

Item #:
PRO SN3N215G
92.00
Each
7524 Gimatic 5-Wire Teachable C-Slot NPN Sensor with 2.5m lead

Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.

Item #:
PRO SN4M225G
70.00
Each
7523 Gimatic 5-Wire Teachable C-Slot PNP Sensor with 2.5m lead

Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.

Item #:
PRO SN4N225G
70.00
Each
7525 Gimatic 5-Wire Teachable C-Slot PNP Sensor with M8 Connector

Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.

Item #:
PRO SS3N215G
92.00
Each
7522 Gimatic 5-Wire Teachable C-Slot NPN Sensor with 2.5m lead

Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.

Item #:
PRO SS4M225G
70.00
Each
7521 Gimatic 5-Wire Teachable C-Slot PNP Sensor with 2.5m lead

Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.

Item #:
PRO SS4N225G
70.00
Each