EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7169 Gimatic Parallel Gripper SX5060 60mm Stroke-50mm Bore
SX parallel grippers are specifically designed to provide the better performances in harsh environments, internally sealed to preserve from dust, oil and also one meter underwater with protection class IP67. These parallel grippers have no internal volumes, so there is no risk of aspiration caused by the pump effect of a variable volume.
- 1700g
- 60mm Stroke
- Double acting
- 50 bore
- Optional proximity magnetic sensors available, including midstroke detection with Gimatic PRO.. sensors
- Completely sealed IP67 gripper, suitable for Clean Room Applications
- Internally sealed and tested up to 1 meter under water
- Available on request with food grease FDA–H1 and with high temperature seals
EMI has taken a cost-effective and industry-proven gripper to expand the capabilities of Universal Robots UR3, UR5 and UR10 Collaborative Industrial robots. View the SX Cobot Kit here.
This sensor is the replacement for Part# SS3M203Y. The only difference is it does not come with the adaptor for grippers with a T-slot.
This sensor is the replacement for Part# SS3N203Y. The only difference is it does not come with the adapter for grippers with a T-slot.
This sensor is the replacement for Part# SS4M225Y. The only difference is it does not come with the adapter for grippers with a T-slot.
This sensor is the replacement for Part# SS4N225Y. The only difference is it does not come with the adapter for grippers with a T-slot.
Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.
Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.
Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.
Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.
Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.
Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.