7146 Gimatic Three-Jaw Parallel Gripper TH 2725 3 x 2.5mm Stroke

Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.

Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.

Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.

Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.

Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.

Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.

This sensor is the replacement for Part# SS3M203Y. The only difference is it does not come with the adaptor for grippers with a T-slot.

This sensor is the replacement for Part# SS3N203Y. The only difference is it does not come with the adapter for grippers with a T-slot.

This sensor is the replacement for Part# SS4M225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

This sensor is the replacement for Part# SS4N225Y. The only difference is it does not come with the adapter for grippers with a T-slot.