EMI MEX
216-535-4848
Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012
S2K Commerce - Products Dropdown
Actions
- ${title}
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084
S2K Commerce - Shopping Cart
Actions
- ${title}
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5
S2K Commerce - Order Entry
Actions
- ${title}
Loading...
Size
Type
>ASS< I.D. Grippers
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Extremely lightweight, and normally closed.
- Made utilizing selective laser sintering technology.
- Optional magnetic field sensor for open/close position sensing.
- Low cost alternative to air hands, tested to last 2 million cycles.
- Positive / negative pressure filter is recommended, see our Valves & Regulators section.
- Replacement springs available.
- IGP Grippers with EP Soft Touch Coating, slip resistant and silicone free. Working temp is 194°F with short term temp. resistance of 266°F.
1 - 28 of 28
Description
Price
Quantity
- 14g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅10–14mm ID Grip Diameter.
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-00-00
Item#:
IGP 14 10 14 EP
Available:
In Stock
145.95
Each
- 14g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅11–15mm ID Grip Diameter
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-01-00-1
60.90
Each
- 14g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅13–17mm ID Grip Diameter.
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-01-00
145.95
Each
- 15g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅14–18mm ID Grip Diameter
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-02-00-1
60.90
Each
- 15g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅16–20mm ID Grip Diameter.
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-02-00
145.95
Each
- 16g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅17–21mm ID Grip Diameter
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-03-00-1
60.90
Each
- 16g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅19–23mm ID Grip Diameter.
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-03-00
145.95
Each
- 16g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅20–24mm ID Grip Diameter
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-04-00-1
60.90
Each
- 16g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅22–26mm ID Grip Diameter.
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-04-00
145.95
Each
- 17g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅23–27mm ID Grip Diameter
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-05-00-1
60.90
Each
- 17g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅25–29mm ID Grip Diameter.
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-05-00
145.95
Each
- 14g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅8–12mm ID Grip Diameter
- ∅14mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, see below.
- Optional sensors available, see below
- Operating temperature: –40–176°F
- Reference: 1-472-00-00-1
60.90
Each
- 42g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅26–30mm ID Grip Diameter
- ∅20mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-06-00
165.90
Each
- 42g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅28–32mm ID Grip Diameter.
- ∅20mm Clampable stud & 4mm Push–to–connect.
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-06-00
213.15
Each
- 43g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅29–33mm ID Grip Diameter
- ∅20mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-07-00
165.90
Each
- 43g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅31–35mm ID Grip Diameter.
- ∅20mm Clampable stud & 4mm Push–to–connect.
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-07-00
213.15
Each
- 44g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅32–36mm ID Grip Diameter
- ∅20mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-08-00
165.90
Each
- 44g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅34–38mm ID Grip Diameter.
- ∅20mm Clampable stud & 4mm Push–to–connect.
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-08-00
213.15
Each
- 46g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅35–39mm ID Grip Diameter
- ∅20mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-09-00
165.90
Each
- 46g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅37–41mm ID Grip Diameter.
- ∅20mm Clampable stud & 4mm Push–to–connect.
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-09-00
213.15
Each
- 46g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅38–42mm ID Grip Diameter
- ∅20mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-10-00
165.90
Each
- 46g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅40–44mm ID Grip Diameter.
- ∅20mm Clampable stud & 4mm Push–to–connect.
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-10-00
213.15
Each
- 50g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅41–45mm ID Grip Diameter
- ∅20mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-11-00
165.90
Each
- 50g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅43–47mm ID Grip Diameter.
- ∅20mm Clampable stud & 4mm Push–to–connect.
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-11-00
213.15
Each
- 52g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅44–49mm ID Grip Diameter
- ∅20mm Clampable stud & 4mm Push–to–connect
- A fine filter is recommended, call EMI
- Optional magnetic sensors available
- Operating temperature: –40–176°F
- Reference: 1-472-12-00
165.90
Each
- 52g
- 100g Suggested Max Payload. Fingers might break if you exceed this payload.
- Lightweight gripper made utilizing laser sinter technology
- ∅46–50mm ID Grip Diameter.
- ∅20mm Clampable stud & 4mm Push–to–connect.
- A fine filter is recommended, see Quick# 2644.
- Optional magnetic sensors available.
- Operating temperature: –40–194°F with short term resistance of 266°F.
- Reference: 1-473-12-00
213.15
Each
4.73
Each
5.25
Each
1 - 28 of 28