EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
Nipper Blades for Cutting Plastic
Only EMI gives you this wide of a selection of in-stock blade brands. Gimatic, Swanstrom, Vessel, & Nile all have very good quality blades. Mix and match blade brands with nipper body brands to best suit your application. Check out all the alternatives! Or call our EOAT engineering department for assistance.
EMI also offers a Nipper Blade Reconditioning Service for Vessel, Gimatic, Senvex, Nile, and Swanstrom nippers. Send blades to our Wickliffe location for service.
Nipper Blade Tip-to-Tip Opening Dimensions: Size 5 | Size 10 | Size 20 | Size 30 | Size 50
- 114g
- 3mm Sprue Diameter
- 15° Angle
- Replacement springs available, Quick#1283
- Call EMI for blade resharpening service
- 112g
- 4mm Sprue Diameter
- 40° Angle
- Replacement springs available, Quick#1283
- Call EMI for blade resharpening service
- 186g
- 8mm Sprue Diameter
- 40° Angle
- Replacement springs available, Quick#1283
- Call EMI for blade resharpening service
- 122g
- 6mm Sprue Diameter
- Replacement springs available, Quick#1283
- Call EMI for blade resharpening service
- 220g
- 8mm Sprue Diameter
- Replacement springs available, Quick#1283
- Call EMI for blade resharpening service
The N20AML side-opening or laterally left-facing air nipper blade is useful in cramped areas. This blade is commonly used with Vessel GT-NB series bracket type sliding air nippers to position the air nipper and cutting blade closer towards the cutting area.
- Blade Opening tip to tip: 9.5mm
- Blade Cutting edge length: 26mm
- Material: Alloy
- Reference Part#: N20AML, N20AML1498
The N20AMR side-opening or laterally right-facing air nipper blade is useful in cramped areas. This blade is commonly used with Vessel GT-NB series bracket type sliding air nippers to position the unit closer towards the cutting area.
- Blade Opening tip to tip: 9.5mm
- Blade Cutting edge length: 26mm
- Material: Alloy
- Reference Part#: N20AMR, N20AMR1499
- 116g
- 7mm Sprue Diameter
- 15° Angle
- Replacement springs available, Quick#1283
- Call EMI for blade resharpening service
- 126g
- 6mm Sprue Diameter
- 40° Angle
- Replacement springs available, Quick#1283
- Call EMI for blade resharpening service
- 372g
- 30° Angle
- Replacement springs available, Quick#1285
- Call EMI for blade resharpening service
- Reference: Vessel blade: N30AA114
- 386g
- Replacement springs available, Quick#1285
- Call EMI for blade resharpening service
The N30AE767-1 end-cut air nipper blade has a long throat for clearance and is used for processing plastic ride gates and discard gates that are in narrow recessed areas.
- 43mm Throat
- Blade Opening tip to tip: 16.5mm
- Blade cutting edge length: 17mm
- Alloy
- 470g
- Replacement springs available, Quick#1285
- Call EMI for blade resharpening service
The N30AML side-opening or laterally left-facing air nipper blade is useful in cramped areas. This blade is commonly used with Vessel GT-NB series bracket type sliding air nippers to position the air nipper and cutting blade closer towards the cutting area.
- Blade Opening tip to tip: 13mm
- Blade Cutting edge length: 35mm
- Material: Alloy
- Reference Part#: N30AML, N30AML1435
The N30AMR side-opening or laterally right-facing air nipper blade is useful in cramped areas. This blade is commonly used with Vessel GT-NB series bracket type sliding air nippers to position the unit closer towards the cutting area.
- Blade Opening tip to tip: 13mm
- Blade Cutting edge length: 35mm
- Material: Alloy
- Reference Part#: N30AMR, N30AMR1395
- 358g
- 15° Angle
- Replacement springs available, Quick#1285
- Call EMI for blade resharpening service
- 376g
- 30° Angle
- Replacement springs available, Quick#1285
- Call EMI for blade resharpening service
- 32g
- 15° Angle
- Replacement springs available, Quick#1281
- Call EMI for blade resharpening service
The N50AB steep angle air nipper blade helps keep the air nipper body away from the cutting area for clearance. It offers a long cutting edge and is suitable for direct gate cutting while leaving no vestige for a clean-cut finish.
- Alloy
- 30° Angle
- 21mm Blade Opening tip to tip
- 29mm Blade Cutting edge length
- Call EMI for blade resharpening service
The N50ABH41 air nipper blade has brazed high speed steel inserts for enhanced durability against cutting very hard plastic. Its steep angle helps keep the air nipper body away from the cutting area for clearance. It offers a long cutting edge and is suitable for direct gate cutting while leaving no vestige for a clean-cut finish.
- High Speed Steel
- 30° Angle
- 29mm Blade Opening tip to tip
- 37mm Blade Cutting edge length
- Call EMI for blade resharpening service
The "AJL" style long straight blade is useful when there is distance between the air nipper body and the gate. It offers a wider blade opening and cuts perpendicular against the injection molded part.
- Alloy
- 0° Angle
- 29mm Blade Opening tip to tip
- 50mm Blade Cutting edge length
- Call EMI for blade resharpening service
The N50AL "L-shape" long air nipper blade is ideal for direct plastic gate cutting. It can also be used to cut gates in deep or narrow spaces.
- Alloy
- 20mm Blade Opening tip to tip
- 36mm Blade Cutting edge length
- Call EMI for blade resharpening service
- For GT–NT20 Nipper Bodies
- Replacement springs available
- Call EMI for blade resharpening service
The N30AEL end-cut air nipper blade has an extra long throat for clearance and is used for processing plastic ride gates and discard gates that are in recessed narrow areas.
- Blade Opening tip to tip using Size 30 Nipper body: 21mm
- Blade Opening tip to tip using Size 50 Nipper body: 43mm
- Blade Cutting edge length: 17mm
- Material: Alloy
The N30FAL nipper blade is ideal for direct plastic gate cutting and useful to cut gates in narrow spaces. This L-shape blade is designed to work with VESSELâs Size-30 type air nipper bodies. However, if a larger blade opening is needed, the N30FAL can be used with VESSELâs larger size GT-NR50F round air nipper body.
- Blade Opening tip to tip using Size 30 Nipper body: 14mm
- Blade Cutting edge length: 36mm
- Material: Alloy
