Sensor Boxes for EOAT Applications

• 57g
• AND output (series) for 1 to 4 sensors
• Compact design
• Un-used terminals can be toggled off, simplifying the set-up process.
• Signals can be converted (PNP to NPN & NPN to PNP).
• All sensors in a box must be NPN or PNP, except in a series of boxes where entire boxes can be different.
• LED indicators allow for easy troubleshooting.
• Strip wires before inserting them into the box. (Maximum Exposed Conductor Length: 10mm)
• Ensure copper conductors are tightly twisted together before inserting.

• Reference: J002237

• 115g
• AND output (series) for 1 to 8 sensors
• Compact design
• Un-used terminals can be toggled off, simplifying the set-up process.
• Signals can be converted (PNP to NPN & NPN to PNP).
• All sensors in a box must be NPN or PNP, except in a series of boxes where entire boxes can be different.
• LED indicators allow for easy troubleshooting.
• Expandable up to 32 inputs with additional boxes (4 boxes total)
• Strip wires before inserting them into the box.

• Reference: J002161

• Terminal box used to connect up to four PNP sensors in a series or individually

• Relay board is used for series connection of multiple sensor signals (22–26V dc)

• Relay board is used for series connection of multiple sensor signals (22–26V dc)

• Relay board is used for series connection of multiple sensor signals (22–26V dc)

• Relay board is used for series connection of multiple sensor signals (22–26V dc)

• Connect different types of sensors in parallel or a series
• Signals can be coverted (NPN/PNP)
• I/O may be PNP = sourcing, NPN = sinking, or dry contact
• LED indicators allow for easy troubleshooting
• Regenerates signals and protects contacts
• Several boxes may be combined in a series
• Profile mounting kit & four strain reliefs are included

• 180x113x3
• 20mm tab for optional mounting position

• Connect different types of sensors in parallel or a series
• Signals can be coverted (NPN/PNP)
• I/O may be PNP = sourcing, NPN = sinking, or dry contact
• LED indicators allow for easy troubleshooting
• Regenerates signals and protects contacts
• Several boxes may be combined in a series
• Profile mounting kit & four strain reliefs are included

• 65x84x3
• 20mm tab for optional mounting position

• Connect different types of sensors in parallel or a series
• Signals can be coverted (NPN/PNP)
• I/O may be PNP = sourcing, NPN = sinking, or dry contact
• LED indicators allow for easy troubleshooting
• Regenerates signals and protects contacts
• Several boxes may be combined in a series
• Profile mounting kit & four strain reliefs are included

• 94x84x3
• 20mm tab for optional mounting position

• Connect different types of sensors in parallel or a series
• Signals can be coverted (NPN/PNP)
• I/O may be PNP = sourcing, NPN = sinking, or dry contact
• LED indicators allow for easy troubleshooting
• Regenerates signals and protects contacts
• Several boxes may be combined in a series
• Profile mounting kit & four strain reliefs are included

• 113x94x3
• 20mm tab for optional mounting position

• Connect different types of sensors in parallel or a series
• Signals can be coverted (NPN/PNP)
• I/O may be PNP = sourcing, NPN = sinking, or dry contact
• LED indicators allow for easy troubleshooting
• Regenerates signals and protects contacts
• Several boxes may be combined in a series
• Profile mounting kit & four strain reliefs are included

• 130x113x3
• 20mm tab for optional mounting position

• 50g

The first module of any SBM series stack. The Primary Module receives the power supply and transmits the output signal to a robot or PLC. Depending on output needs, one or more primary units can be used in a stack.

• 50g
• Primary unit with 1m 4-wire lead
• Input connection: 2 wires for power supply (Blue:GND, Brown: Vcc)
• Output connections: 2 configurable PNP or NPN outputs
• Modular, very compact, scalable solution
• Sensor input can be switched from Normally Open to Normally Closed to suit application needs
• 12-24Vdc power
• Series connection up to 20 sensors
• Direct mounting on standard aluminum profile
• IP40 rating

The first module of any SBM series stack. The Primary Module receives the power supply and transmits the output signal to a robot or PLC. Depending on output needs, one or more primary units can be used in a stack.

• 50g
• Primary unit with 1m 3-wire lead
• Input connection: 2 wires for power supply (Blue:GND, Brown: Vcc)
• Output connections: 1 configurable PNP or NPN output
• Modular, very compact, scalable solution
• Sensor input can be switched from Normally Open to Normally Closed to suit application needs
• 12-24Vdc power
• Series connection up to 20 sensors
• Direct mounting on standard aluminum profile
• IP40 rating

The Secondary Modules receive the signal from the sensor and transmits it to the Primary Module. Up to 20 secondary modules can be linked to one master module.

• 50g
• Connect M8 3-pin sensors (pnp or npn) in series or individually.
• Connect up to 20 secondary modules to one primary module.
• Secondary units can reverse Normally Open (NO) / Normally Closed (NC) sensor logic.
• Primary module has NO & NC signal LED indicators.
• Primary module can send either pnp or npn outputs back to PLC.
• Easy configuration using switches (see below).
• LED sensor status indicators for easy troubleshooting.
• 12-24 Vdc (+/- 10%) power requirement.
• IP40 rating
• End caps allow direct mounting on standard aluminum profile.
• A modular, very compact, scalable solution.
• All modules (primary, secondary, end cap) are 36mm x 34mm x 10mm.

The Secondary Modules receive the signal from the sensor and transmits it to the Primary Module.

• 50g
• Secondary unit with 150mm female M8 3 poles connector
• 1 Input connection PNP / NPN / REED type with 1 digital output
• Modular, very compact, scalable solution
• Sensor input can be switched from Normally Open to Normally Closed to suit application needs
• 12-24Vdc power
• Series connection up to 20 sensors
• Direct mounting on standard aluminum profile
• IP40 rating