EMI MEX
216-535-4848
Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012
S2K Commerce - Products Dropdown
Actions
- ${title}
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084
S2K Commerce - Shopping Cart
Actions
- ${title}
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5
S2K Commerce - Order Entry
Actions
- ${title}
Loading...
Signal
Type
Teachable PRO Sensors for EOAT
Gimatic PRO-SS and PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. Highly accurate, this sensor is ideal for part confirmation/mid-stroke detection for any size gripper.
Gimatic PRO-SSR sensors have up to 2 programmable output signals, open, closed, and one that detects any position in the middle. Perfect for sprue applications where sprue sizes can differ and part picking where the part size can change depending on position.
- Easy single button programming.
- Ideal for applications where space is limited and multiple output signals are needed.
- For Gimatic C shaped sensor slots and fixed in place with set screw.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
Watch the PRO Sensor in Action:
1 - 21 of 21
Description
Price
Quantity
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire cable with M8 Connector
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 1.5 meters with set screw
- Adaptor #7527 is available for combining the single 5-pin M8 into 3x3pin M8 connectors.
Item#:
PRO SN3M215G
Available:
In Stock
92.00
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size SGP-S gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire cable with M8 Connector
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 1.5 meters with set screw
- Adaptor #7527 is available for combining the single 5-pin M8 into 3x3pin M8 connectors.
Item#:
PRO SN3M215HSG
Available:
In Stock
80.00
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire cable with M8 Connector
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 1.5 meters with set screw
- Adaptor #7527 is available for combining the single 5-pin M8 into 3x3pin M8 connectors.
Item#:
PRO SN3N215G
Available:
In Stock
92.00
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size SGP-S gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire cable with M8 Connector
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 1.5 meters with set screw
- Adaptor #7527 is available for combining the single 5-pin M8 into 3x3pin M8 connectors.
Item#:
PRO SN3N215HSG
Available:
In Stock
80.00
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire lead cable, 2.5m: Brown - 24Vdc, Blue - 0Vdc, Black - Output 1, White - Output 2, Grey - Output 3
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 2.5 meters with set screw
Item#:
PRO SN4M225G
Available:
In Stock
70.00
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size SGP-S gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire lead cable, 2.5m: Brown - 24Vdc, Blue - 0Vdc, Black - Output 1, White - Output 2, Grey - Output 3
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 2.5 meters with set screw
Item#:
PRO SN4M225HSG
Available:
In Stock
70.00
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire lead cable, 2.5m: Brown - 24Vdc, Blue - 0Vdc, Black - Output 1, White - Output 2, Grey - Output 3
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 2.5 meters with set screw
Item#:
PRO SN4N225G
Available:
In Stock
70.00
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size SGP-S gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire lead cable, 2.5m: Brown - 24Vdc, Blue - 0Vdc, Black - Output 1, White - Output 2, Grey - Output 3
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 2.5 meters with set screw
Item#:
PRO SN4N225HSG
Available:
In Stock
70.00
Each
Gimatic PRO-SNR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
- Perfect for sprue applications where sprue sizes can differ and part picking where the part size can change depending on position.
- Easy single button programming.
- 5-Wire, 12/24 Vdc, 0.2 A, PUR cable, 2.5 meters long leads
- Ideal for applications where space is limited and multiple output signals are needed, up to 2 positions.
- For Gimatic C shaped sensor slots and fixed in place with set screw.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- Adaptor #7527 is available for combining the single 8-pin M8 into 3x3pin M8 connectors.
- To guide you through the process of teaching your PRO sensor, there is a TEACH button, and various LED lights, one for power and one for each output signal: 1, 2, and 3. The output signal LED lights will flash as you cycle through the teaching mode. See the Programming Procedure linked document for further information.
46.27
Each
Gimatic PRO-SNR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
- Perfect for sprue applications where sprue sizes can differ and part picking where the part size can change depending on position.
- Easy single button programming.
- 5-Wire, 12/24 Vdc, 0.2 A, PUR cable, 2.5 meters long leads
- Ideal for applications where space is limited and multiple output signals are needed, up to 2 positions.
- For Gimatic C shaped sensor slots and fixed in place with set screw.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- Adaptor #7527 is available for combining the single 8-pin M8 into 3x3pin M8 connectors.
- To guide you through the process of teaching your PRO sensor, there is a TEACH button, and various LED lights, one for power and one for each output signal: 1, 2, and 3. The output signal LED lights will flash as you cycle through the teaching mode. See the Programming Procedure linked document for further information.
46.27
Each
Gimatic PRO-SNR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
- Perfect for sprue applications where sprue sizes can differ and part picking where the part size can change depending on position.
- Easy single button programming.
- 5-Wire, 12/24 Vdc, 0.2 A, PUR cable, 2.5 meters long leads
- Ideal for applications where space is limited and multiple output signals are needed, up to 2 positions.
- For Gimatic C shaped sensor slots and fixed in place with set screw.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- Adaptor #7527 is available for combining the single 8-pin M8 into 3x3pin M8 connectors.
- To guide you through the process of teaching your PRO sensor, there is a TEACH button, and various LED lights, one for power and one for each output signal: 1, 2, and 3. The output signal LED lights will flash as you cycle through the teaching mode. See the Programming Procedure linked document for further information.
71.30
Each
Gimatic PRO-SNR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
- Perfect for sprue applications where sprue sizes can differ and part picking where the part size can change depending on position.
- Easy single button programming.
- 5-Wire, 12/24 Vdc, 0.2 A, PUR cable, 2.5 meters long leads
- Ideal for applications where space is limited and multiple output signals are needed, up to 2 positions.
- For Gimatic C shaped sensor slots and fixed in place with set screw.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- Adaptor #7527 is available for combining the single 8-pin M8 into 3x3pin M8 connectors.
- To guide you through the process of teaching your PRO sensor, there is a TEACH button, and various LED lights, one for power and one for each output signal: 1, 2, and 3. The output signal LED lights will flash as you cycle through the teaching mode. See the Programming Procedure linked document for further information.
71.30
Each
Includes:
- Pro Sensor Pendant Bracket
- QTY 2 – M5x12 Flat head Socket Head Screws
- QTY 2 – 7115 Drop In Channel Nuts
4.99
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire cable with M8 connector
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 1.5 meters with set screw
- Adaptor #7527 is available for combining the single 5-pin M8 into 3x3pin M8 connectors.
Item#:
PRO SS3M215G
Available:
In Stock
92.00
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire cable with M8 connector
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 1.5 meters with set screw
- Adaptor #7527 is available for combining the single 5-pin M8 into 3x3pin M8 connectors.
Item#:
PRO SS3N215G
Available:
In Stock
92.00
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire lead cable, 2.5m: Brown - 24Vdc, Blue - 0Vdc, Black - Output 1, White - Output 2, Grey - Output 3
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 2.5 meters with set screw
Item#:
PRO SS4M225G
Available:
In Stock
70.00
Each
- Easy single button programming. See the Programming Procedure linked document for further information.
- Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size gripper.
- Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- 5-Wire lead cable, 2.5m: Brown - 24Vdc, Blue - 0Vdc, Black - Output 1, White - Output 2, Grey - Output 3
- 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 2.5 meters with set screw
Item#:
PRO SS4N225G
Available:
Out Of Stock
70.00
Each
- Perfect for sprue applications where sprue sizes can differ and part picking where the part size can change depending on position.
- Easy single button programming.
- 5-Wire, 12/24 Vdc, 0.2 A, PUR cable, 2.5 meters long leads
- Ideal for applications where space is limited and multiple output signals are needed, up to 2 positions.
- For Gimatic C shaped sensor slots and fixed in place with set screw.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- Adaptor #7527 is available for combining the single 8-pin M8 into 3x3pin M8 connectors.
- To guide you through the process of teaching your PRO sensor, there is a TEACH button, and various LED lights, one for power and one for each output signal: 1, 2, and 3. The output signal LED lights will flash as you cycle through the teaching mode. See the Programming Procedure linked document for further information.
Item#:
PRO SSR3M215G
Available:
In Stock
87.00
Each
- Perfect for sprue applications where sprue sizes can differ and part picking where the part size can change depending on position.
- Easy single button programming.
- 5-Wire, 12/24 Vdc, 0.2 A, PUR cable, 2.5 meters long leads
- Ideal for applications where space is limited and multiple output signals are needed, up to 2 positions.
- For Gimatic C shaped sensor slots and fixed in place with set screw.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- Adaptor #7527 is available for combining the single 8-pin M8 into 3x3pin M8 connectors.
- To guide you through the process of teaching your PRO sensor, there is a TEACH button, and various LED lights, one for power and one for each output signal: 1, 2, and 3. The output signal LED lights will flash as you cycle through the teaching mode. See the Programming Procedure linked document for further information.
Item#:
PRO SSR3N215G
Available:
In Stock
87.00
Each
- Perfect for sprue applications where sprue sizes can differ and part picking where the part size can change depending on position.
- Easy single button programming.
- 5-Wire, 12/24 Vdc, 0.2 A, PUR cable, 2.5 meters long leads
- Ideal for applications where space is limited and multiple output signals are needed, up to 2 positions.
- For Gimatic C shaped sensor slots and fixed in place with set screw.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- Adaptor #7527 is available for combining the single 8-pin M8 into 3x3pin M8 connectors.
- To guide you through the process of teaching your PRO sensor, there is a TEACH button, and various LED lights, one for power and one for each output signal: 1, 2, and 3. The output signal LED lights will flash as you cycle through the teaching mode. See the Programming Procedure linked document for further information.
Item#:
PRO SSR4M225G
Available:
In Stock
70.00
Each
- Perfect for sprue applications where sprue sizes can differ and part picking where the part size can change depending on position.
- Easy single button programming.
- 5-Wire, 12/24 Vdc, 0.2 A, PUR cable, 2.5 meters long leads
- Ideal for applications where space is limited and multiple output signals are needed, up to 2 positions.
- For Gimatic C shaped sensor slots and fixed in place with set screw.
- Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
- Wide +/- 30mm sensing range (relative to the magnet and the sensor).
- Adaptor #7527 is available for combining the single 8-pin M8 into 3x3pin M8 connectors.
- To guide you through the process of teaching your PRO sensor, there is a TEACH button, and various LED lights, one for power and one for each output signal: 1, 2, and 3. The output signal LED lights will flash as you cycle through the teaching mode. See the Programming Procedure linked document for further information.
Item#:
PRO SSR4N225G
Available:
In Stock
70.00
Each
1 - 21 of 21