S2K Commerce - Products Dropdown
Actions- ${title}
S2K Commerce - Shopping Cart
Actions- ${title}
S2K Commerce - Order Entry
Actions- ${title}
Accessories for Cobots
Equipped with an M8, 3-pole cable, 4mm and 6mm fittings, silencers, threaded and push plugs, neoprene padded strap and a 3D printed shroud the EMI's Cobot Solenoid Valve Kit is the cornerstone of all pneumatic end effectors.
- 230g
- Simple, on-arm design with protective shroud and non-slip Velcro® strap to mount to the robot arm.
- 5/2 Solenoid Valve - Single - Solenoid, monostable
- Each Kit includes one (1x) 3D printed manifold with eight (8x) pre-installed push-to-connect fittings, a 12in and 18in Velcro® strap with neoprene padding.
- Compatible with our popular Cable Management Kit Q#8015 (listed below in 'Related Items') and other Cobot Accessories.
8402 4mm Tubing Management Kit for Collaborative Robots
8403 6mm Tubing Management Kit for Collaborative Robots
8404 8mm Tubing Management Kit for Collaborative Robots
- Housing made of lightweight impact-resistant plastic.
- Connection of compressed air and vacuum with push-in 6mm
- Max. Vacuum level*: 93%
- Max suction flow*: 0.77 CFM (21.8 l/min)
- Air consumption*: 1.97 CFM (55.8 l/min)
- Operating pressure: 1-8bar. Standard supply pressure: 6 Bar (87 psi)
- Operating temp: 32-122 degree F.
- *Values listed are achieved when supplied at the listed standard supply pressure.
- Silencer (can use optional low-profile silencer #8068 with #244 sealing ring)
- 12” and 18” Velcro strap with neoprene backing
- 3-pin M8 connector and 2.5m leads
- 6mm clear polyurethane tubing
- Lightweight POM generator body with PA12 shroud.
- Connection of compressed air and vacuum with push-in 6mm
- Vacuum Connection: 8mm
- Gimatic Vacuum Generator #V2133
- Atmospheric quick release valve
- Pre-set vacuum switch: PNP, -30kPa
- Max. Vacuum level*: 73%
- Max suction flow*: 2.86 CFM (81 l/min)
- Air consumption*: 0.91 CFM (25.8 l/min)
- Operating pressure: 1-8bar. Standard supply pressure: 6 Bar (87 psi)
- Operating temp: 32-122 degree F.
- *Values listed are achieved when supplied at the listed standard supply pressure.
Available with ∅63mm, ∅75mm and ∅90mm robot wrist clamps, it can secure 8x conduits up to ∅10m each with an additional grommet at the center for additional tubing and cables.
No cable ties required!
- 93g
- Compatible robot wrist size: ∅90mm (also available in ∅63mm, ∅75mm or custom)
- (8x) ∅2.5-10mm pass-throughs with thumbscrews and adjustable clamps
- Central pass through for additional cables or larger tubing.
- Friction pads on clamp to prevent spinning on robot wrist.
- Fits most common M8 connectors through.
- 4mm hex key needed for installation on robot
- No tools or cable ties to secure your tubing and cables
Available with ∅63mm, ∅75mm and ∅90mm robot wrist clamps, it can secure 8x conduits up to ∅10m each with an additional grommet at the center for additional tubing and cables.
No cable ties required!
- 85g
- Compatible robot wrist size: ∅63mm (also available in ∅75mm, ∅90mm or custom)
- (8x) ∅2.5-10mm pass-throughs with thumbscrews and adjustable clamps
- Central pass through for additional cables or larger tubing.
- Friction pads on clamp to prevent spinning on robot wrist.
- Fits most common M8 connectors through.
- 4mm hex key needed for installation on robot
- No tools or cable ties to secure your tubing and cables
Available with ∅63mm, ∅75mm and ∅90mm robot wrist clamps, it can secure 8x conduits up to ∅10m each with an additional grommet at the center for additional tubing and cables.
No cable ties required!
- 86g
- Compatible robot wrist size: ∅75mm (also available in ∅63mm, ∅90mm or custom)
- (8x) ∅2.5-10mm pass-throughs with thumbscrews and adjustable clamps
- Central pass through for additional cables or larger tubing.
- Friction pads on clamp to prevent spinning on robot wrist.
- Fits most common M8 connectors through.
- 4mm hex key needed for installation on robot
- No tools or cable ties to secure your tubing and cables