• Includes hardware.

• 63g
• 2x4mm Stroke
• Double acting. Can be setup as Normally Open or Normally Closed by swapping the jaw that each gripper finger is mounted to. See Gripper Operation tab or 'Additional Specifications' pdf that is linked above.
• Self–Centering
• Optional magnetic and inductive sensors available

• 2050g
• Size 2, without fittings
• Purchase EOAT mounting plate separately
• Optional magnetic sensors available for closed-state detection.

HD63 Features:

• HD63 robot side is made from hard-anodized aluminum and a robust locking latch strike insert.
• The tool pocket for larger, heavier tools includes slotted receiver for the recommended stabilizer plates (Q#8490 & Q#8491).
• With an added secondary safety latch, the tool side HD63 ensure the tool can only be released when it is securely nested into the tool pocket.
• Note that the HD63 tool side with the safety latch is not compatible with the Gen III (standard) SmartShift version and requires the HD63 Tool Pocket (Q#8470).

• 262g
• EMI suggested payload: 165.3lbs (75kg)* *Manufacturer specified max. payload: 150kg. Not recommended for collaborative applications. Contact EMI Engineering.
• Metal construction for even more stability.
• Safety lever to engage/disengage.
• Uses the same accessories for pneumatic and electric expansion.
• Tool Pocket now can be enhanced with stabilizer plates for regular or manifold-mounted tools
• Includes mounting hardware.
• No electricity required when changing tools via unique wedge mount.
• Equipped with an air interface allowing easy mounting of many end effectors

• Reference SmartShift: 1600

• 146g
• Built in motor drive
• Self–centering jaw system
• 2x3mm Stroke
• 15lbf Total gripping force
• T–slot style jaws for heavy loads
• 24 volt DC with on/off signal from PLC

• 183g
• Built in motor drive
• Self–centering jaw system
• 3x3mm Stroke
• 12.81 lbf Total gripping force
• T–slot style jaws for heavy loads
• 24 volt DC with on/off signal from PLC

• Reference Coval: 80004834

• Includes sealing ring.

• Reference Gimatic Order Code: 1600005, Part Number: FT.M5M

• M16x2 Thread–110mm Long

• M16x2 Thread–120mm Long

• M16x2 Thread–60mm Long

• No Backplate
• 300mm x 150mm x 3.3mm thick

• Black
• 212° max. temp.
• 48° durometer

• Reference Gimatic Order Code: 2321601, Part Number: VG.B22E.50

• Blue
• 302° max. temp.
• 60° durometer
• Non–marking HNBR material has a higher temp range

• Reference Gimatic Order Code: 2321606, Part Number: VG.B22H.60

• 210g
• For J Profile
• 3mm thick
• 160mm Long

• Reference: 1-122-42-00

• Rectangle with .16m Lead & M8 Connection
• Power Supply: 12–30V dc
• Operating Temperature: –30 to 85C°

• ∅6mm stem dimension, ∅6mm(x2) outlets

• Standard Thread: 7/8" - 14
• Rear Opening: 1/2"
• Made of Ampco copper alloy
• 3/16" Orifice, 3/4" Radius

• 3-wire
• Connector angle: Straight
• IP69K
• 4.3mm cable diameter
• 2.5M long PVC cable
• -13 to 167F temperature range

• 80g

• Hithane Flat Cups: 8, 15, and 20mm
• Hithane 1.5 Bellows: 14, 20, and 25mm
• Hithane 2.5 Bellows: 7, 9, 12, 14, 18, 25mm
• Paper & Foil: 15, 20, and 25mm