Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  EOAT for Cobots  >  Gripper EOAT Kits  > 8001 SGPS Compact Parallel Gripper Kit for Industrial Cobots

8001 SGPS Compact Parallel Gripper Kit for Industrial Cobots

Item #:CRK SGP32S A 
Available: In Stock

The Pneumatic SGP High Precision Gripper Kit for Industrial Cobots by EMI is a double-acting parallel gripper ideal for high precision applications such as insert loading or pick-and-place applications that require a high level of accuracy. With blank finger-mounting jaws, the possibilities are virtually endless with the ability to use custom fingers that fit your exact application.

This gripper kit was designed for Universal Robots but EMI can supply a kit complete with interface plates, and quick changers for your Sawyer, Kuka, Fanuc, or other Collaborative Robot.

Certified by Universal Robots

Included in Kit:

  • User Manual
  • SGP-32S Gripper Assembly
  • USB Flash Drive – URCap, EMI Catalogs, EMI Component Library
  • Inductive 3-Wire ∅4mm PNP Sensor with M8 Connector included. Contact EMI if you would like to upgrade to a Teachable PRO SS sensor.
  • Package A – Hardware to mount the gripper assembly to the robot
  • Package C – Wire harness, tubing and Allen key for sensor
  • Pneumatic 5/2 Solenoid Valve & Velcro® Strap
  • Cable & Tubing Management System

Dimensional drawing of SGP-32S gripper kit with aluminum gripper fingers. The gripper fingers that are included with this kit have a gripping range of 0-8mm (X). It’s recommended that custom gripper fingers be manufactured for each application. Please contact EMI Corp. if help is needed with designing or manufacturing custom gripper fingers.

695.00
Each
Quantity:

Our years of experience in high precision applications prove that the SGP family of grippers is the perfect solution for a wide variety of industrial gripper needs. Our engineers use SGP grippers on a daily basis, and now we've outfitted this small gripper to easily adapt to, and maximize the high repeatability of your UR3, UR5 and UR10 Collaborative Industrial Robots.

The SGP High Precision Gripper Kit requires fingers that EMI engineers can help design based on years of expertise solving customer applications from simple to complex. Installation and setup are easy and intuitive. Simply connect your 6mm compressed air line, your 4-wire cable to the controller box, install EM’s URCap to your UR3, UR5 or UR10 and your Pneumatic SGP Kit is ready to expand the capabilities of your Collaborative Industrial Robot.

Custom 3D printed gripper fingers are available, Contact EOAT Engineering today!

Features:

  • Endless possibilities with the use of custom fingers; 8mm V-groove fingers included.
  • High Precision and even in the most harsh environment.
  • Trouble free, long life without maintenance.
  • Proven solution for insert loading.
  • This versatile kit can be adapted to other SGP Gripper sizes with various strokes and gripping force upon request.
  • Ideal for part detection via Inductive sensor that is included. Contact EMI to upgrade to a Teachable 3-position PRO Sensor.
  • The included interface plate mounts directly to any robot with an ISO-9409-1-50-4-M6 tool flange. Contact EMI if you need a different interface plate.
  • CRK-SGP32S-A Weight: 285g (subject to change per configuration).
37.02
Each
7398 Nylon Finger Blanks for SGP 32S & PGR-P32 with Threaded Mounting Hole on Jaw

For current model SGP grippers which have a threaded mounting hole on the jaw. Use these finger blanks for size 32 SGP & PGR compact grippers. Nylon finger blanks help grip parts and prevent them from getting scratched. Machine them to your part's shape or contact EOAT Engineering today! For more information on custom finger blanks for your application visit our 3D printing page.

Item #:
SGP 32 FBP2
27.20
Each
7397 Aluminum Finger Blanks for SGP 32S & PGR-P32 with Threaded Mounting Hole on Jaw

For current model SGP grippers which have a threaded mounting hole on the jaw. Use these finger blanks for size 32 SGP & PGR compact grippers. Why machine custom fingers from scratch? Start with these aluminum finger blanks. They are easy to shape to your part.

Item #:
SGP 32 FBA2
35.36
Each
8094 EOAT Side Quick Changer for Collaborative Robots QC75-B (75mm)

Designed for collaborative robots, the QC75 is a manual quick changer that allows for pneumatic and electrical connections to be easily coupled between jobs. Standardize up to 16 electrical contacts and 4 pneumatic lines to have your cobot up and running with minimal downtime.

How To EMI video

Item #:
QC75 B
256.00
Each
2645 Positive Negative Pressure Filter for 6mm Tubing

With the same convenience as the conventional vacuum filters (the VFU series), this filter can be used in the positive pressure as well.

Item #:
GSF SFU2 0606
18.80
Each
8221 OnRobot EOAT Side Quick Changer for Cobots

Built into every OnRobot gripper, the EOAT Side Quick Changer is now available for all EOAT which makes it easy to click into your cobot. With a 20kg payload, this quick changer is a simple way to swap your EOAT in between applications.

Item #:
OR 102014
588.00
Each
8223 OnRobot Hex-E QC Force/Torque Sensor for Collaborative Robots

OnRobot’s 6-axis force torque sensor provides an accurate force and torque measurement along all 6 axes. This gives you precise control when it comes to difficult jobs. Additionally, the HEX software includes path recording, force control (on UR and Kuka) and special features for insertion tasks (UR only). This means reduced integration time for your production line. The sensors are designed to fit most of the current industrial robot arms.

Certified by Universal Robots
Item #:
OR 102111
4342.00
Each
8022 Cobot Tubing Manifold Kit 4 Port Ø4mm Tubing

Available with Ø4mm push-to-connect fittings, this Tubing Manifold Kit allows you to transition polyurethane tubing between robot joints and to maintain organized pneumatic circuits whether you use straight, spiral tubing or both!

Item #:
CRA TMK 4P04
48.50
Each
83.50
Each
87.50
Each
8401 Wingman Automatic Quick Changer Kit For UR and Fanuc CRX (1 Robot, 2 EOAT sides)

With Wingman automatic tool changers, your cobot will have the flexibility to deploy more tools, solve more tasks and generate more output in your production. This tool changer kit has everything you need to get started.

Item #:
WM1 DK 05 00 A
3990.00
Each
8412 Wingman EOAT Side Automatic Quick Changer

With Wingman automatic tool changers, your cobot will have the flexibility to deploy more tools, solve more tasks and generate more output in your production.

Item #:
WM1 P 02 01 01
660.00
Each
8460 SmartShift Gen III Automatic Quick Changer Kit with 2x Tools For UR & Fanuc CRX

Gen III SmartShift with a vacuum EOAT that requires electrical connection, pneumatics and a vacuum-actuated soft gripper. Tool pockets and framing can be built around your specific application.

SmartShift automatic tool changers feature a clutch-driven engagement that enables mechanical, pneumatic and optional electric connections. No need for compressed air or electricity for coupling, and available as a kit or a la carte, in two different payload capacities. Automatic Tool Changers require some level of added integration, and we encourage you to partner with our EOAT Engineers to ensure a seamless implementation.

Item #:
SS 9225
3028.20
Each
8466 SmartShift Gen III Automatic Quick Changer Tool Side (EOAT Side)

Gen III SmartShift with a vacuum EOAT that requires electrical connection, pneumatics and a vacuum-actuated soft gripper. Tool pockets and framing can be built around your specific application.

SmartShift automatic tool changers feature a clutch-driven engagement that enables mechanical, pneumatic and optional electric connections. No need for compressed air or electricity for coupling, and available as a kit or a la carte, in two different payload capacities. Automatic Tool Changers require some level of added integration, and we encourage you to partner with our EOAT Engineers to ensure a seamless implementation.

Item #:
SS 2120
402.00
Each
8081 Y Splitter with M8 Connector 2x 3-wire Plug, 1x 4-wire Receptacle

For use in applications with many inputs and outputs where space is restricted.

Item #:
GSE E12269
41.00
Each
Enter the quantity for each needed part and click add to cart
No. Part No. Item Description Qty Req. Price Qty
1 SGP 32S
6782 Gimatic Compact Gripper SGP 32S
1
307.00
Each
2 CRM 0131 1A
8050 SGP32S Mounting Plate for Universal Robots
1
32.50
Each
3 CRM 0131 2
8051 SGP32S Spacer Block for Universal Robots Plate
1
13.95
Each
4 CRF 0131 3
8038 Replacement Finger for SGP32S Gripper
2
35.31
Each
5 GSG IS4 M8 PNP
8083 Inductive 3-Wire ∅4mm PNP Sensor with M8 Connector
1
80.00
Each
6 GSF QMA M504
128 Threaded Male M5 Push-In 45 Degree Elbow Fitting
2
3.89
Each
7 GSC M4 14 SS
M4x14mm SHCS-Stainless
2
0.30
Each
8 GSC M4 10 SS
M4x10 SHCS Stainless
2
0.30
Each
9 GSC M4 LW SS
M4 Lock Washer
4
0.20
Each
10 GSC FSH 6X16 SS
M6x16 SHCS Flat Head-Stainless
1
0.40
Each
11 GSC DP 3X8 SS
Undersized Dowel Pin-3x8mm
2
1.00
Each
12 GSC FSH 6X12 SS
M6x12 SHCS-Flat Head-Stainless
4
0.35
Each
13 GSC DP 6X10 SS
Undersized Dowel Pin-M6x10mm
1
2.00
Each
Enter the quantity for each needed part and click add to cart